TPS73201QDRBRQ1
Available
TPS73201QDRBRQ1 TI • Qualified for Automotive Applications • AEC-Q100 Qualified With the Following Results – Device Temperature Grade 0: –40°C to 150°C Ambient Operating Temperature Range – Device HBM Classification Level 2 – Device CDM Classification Level C4B – Device MM Classification Level M2 • Stable With No Output Capacitor or Any Value or Type of Capacitor • Input Voltage Range: 1.7 V to 5.5 V • Ultra-Low Dropout Voltage: 40-mV Typical at 250 mA • Excellent Load Transient Response—With or Without Optional Output Capacitor • New NMOS Topology Provides Low Reverse Leakage Current • Low Noise: 30-μVRMS Typical (10 kHz to 100 kHz) • 0.5% Initial Accuracy • 1% Overall Accuracy (Line, Load, and Temperature) • Less Than 1-μA Maximum IQ in Shutdown Mode • Thermal Shutdown and Specified Minimum and Maximum Current Limit Protection • Available in Multiple Output Voltage Versions – Fixed Outputs of 1.2 V, 1.5 V, 1.6 V, 1.8 V, 2.5 V, 3 V, 3.3 V, and 5 V – Adjustable Outputs From 1.2 V to 5.5 V – Custom Outputs Available 2 Applications • Portable and Battery-Powered Equipment • Post-Regulation for Switching Supplies • Noise-Sensitive Circuitry Such as VCOs • Point of Load Regulation for DSPs, FPGAs, ASICs, and Microprocessors 3 Description The TPS732-Q1 family of low-dropout (LDO) voltage regulators uses a new topology: an NMOS pass element in a voltage-follower configuration. This topology is stable using output capacitors with low ESR, and even allows operation without a capacitor. The topology also provides high reverse blockage (low reverse current) and ground pin current that is nearly constant over all values of output current. The TPS732-Q1 family of devices uses an advanced BiCMOS process to yield high precision while delivering low dropout voltages and low ground pin current. Current consumption, when not enabled, is under 1 μA and ideal for portable applications. The extremely low output noise (30 μVRMS with 0.1-µF CNR) is ideal for powering VCOs. These devices are protected by thermal shutdown and foldback current limit.
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.