TPS1H200AQDGNRQ1 TI
Available
TPS1H200AQDGNRQ1 TI
• Qualified for automotive applications
• AEC-Q100 qualified with the following results:
– Device temperature grade 1:
–40°C to +125°C ambient operating temperature range
– Device HBM ESD Classification Level H2
– Device CDM ESD Classification Level C4B
• Functional Safety-Capable
– Documentation available to aid functional safety system design
• Single-channel 200-mω smart high-side switch
• Wide operating voltage: 3.4 V to 40 V
• Ultra-low standby current, < 500 nA
• Adjustable current limit with external resistor – ±15% when ≥ 500 mA – ±10% when ≥ 1.5 A
• Configurable behavior after current limit
– Holding mode
– Latch-off mode with adjustable delay time
– Auto-retry mode
• Supports stand-alone operation without an MCU
• Protection:
– Short-to-GND and overload protection
– Thermal shutdown and thermal swing
– Negative voltage clamp for inductive loads
– Loss of GND and loss of battery protection
• Diagnostics:
– Overload and short-to-GND detection
– Open-load and short-to-battery detection in ON or OFF state
– Thermal shutdown and thermal swing
• Qualified for automotive applications
• AEC-Q100 qualified with the following results:
– Device temperature grade 1:
–40°C to +125°C ambient operating temperature range
– Device HBM ESD Classification Level H2
– Device CDM ESD Classification Level C4B
• Functional Safety-Capable
– Documentation available to aid functional safety system design
• Single-channel 200-mω smart high-side switch
• Wide operating voltage: 3.4 V to 40 V
• Ultra-low standby current, < 500 nA
• Adjustable current limit with external resistor – ±15% when ≥ 500 mA – ±10% when ≥ 1.5 A
• Configurable behavior after current limit
– Holding mode
– Latch-off mode with adjustable delay time
– Auto-retry mode
• Supports stand-alone operation without an MCU
• Protection:
– Short-to-GND and overload protection
– Thermal shutdown and thermal swing
– Negative voltage clamp for inductive loads
– Loss of GND and loss of battery protection
• Diagnostics:
– Overload and short-to-GND detection
– Open-load and short-to-battery detection in ON or OFF state
– Thermal shutdown and thermal swing
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
