TJA1145TKJ NXP

Description

TJA1145TKJ – High-Speed CAN Transceiver

Overview

The TJA1145TKJ is a high-speed CAN transceiver that provides a galvanic isolated interface between the controller area network (CAN) protocol controller and the physical bus. The device is designed to meet the requirements of CAN applications in the automotive and industrial markets.

Features

  • Compliant with CAN specifications: ISO 11898-2:2016 and SAE J2284-4
  • High-speed transmission: Up to 1 Mbit/s
  • Galvanic isolation: 3.75 kV (rms) for 1 minute
  • Bus fault protection: ±58 V (DC) continuous, ±65 V (DC) transient
  • Thermal shutdown: Yes, with automatic recovery
  • Supply voltage: 4.5 V to 5.5 V (typical)
  • Package: SO8 (5 mm x 6 mm)

Pin Description

Pin Number Pin Name Description
1 VCC Positive power supply
2 GND Ground
3 TXD CAN transmit data input
4 RXD CAN receive data output
5 STB Standbymode input
6 WUP Wake-up input
7 CANH CAN high output
8 CANL CAN low output

Absolute Maximum Ratings

Parameter Min Max Unit
Supply voltage (VCC) -0.5 7 V
Input voltage (TXD, STB, WUP) -0.5 VCC + 0.5 V
Bus voltage (CANH, CANL) -40 40 V
Junction temperature (Tj) -40 150 °C
Storage temperature (Tstg) -40 150 °C

Recommended Operating Conditions

Parameter Min Typ Max Unit
Supply voltage (VCC) 4.5 5 5.5 V
Ambient temperature (Ta) -40 25 125 °C
Input voltage (TXD, STB, WUP) 0 VCC/2 VCC V

Electrical Characteristics

Parameter Min Typ Max Unit
Bus output voltage (CANH, CANL)
– dominant state V
– recessive state V
Input current (TXD, STB, WUP) μA
Junction temperature (Tj) °C

Note: For detailed information on the device’s electrical characteristics, please refer to the datasheet.

Package and Ordering Information

The TJA1145TKJ is available in a SO8 (5 mm x 6 mm) package.

To order, please use the following part number: TJA1145TKJ

Disclaimer

The information provided in this document is subject to change without notice. No warranty is given and no liability is assumed by the manufacturer or its affiliates.