TJA1029TK/1 NXP The TJA1029 is the interface between the Local Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN network. It is primarily intended for in-vehicle subnetworks using baud rates up to 20 kBd and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and SAE J2602. The TJA1029 is pin-compatible with the TJA1020, TJA1021, TJA1022 and TJA1027. The protocol controller generates the transmit data stream. The TJA1029 converts the data stream into an optimized bus signal shaped to minimize ElectroMagnetic Emissions (EME). The LIN bus output pin is pulled HIGH via an internal termination resistor. For a master application, connect an external resistor in series with a diode between pin VBAT and pin LIN. The receiver detects a receive data stream on the LIN bus input pin and transfers it via pin RXD to the microcontroller. Power consumption is very low in Sleep mode. However, the TJA1029 can still be woken up via pins LIN and SLP_N. An integrated TXD dominant time-out function prevents the bus being driven to a permanent dominant state. 2. Features and benefits 2.1 General  Compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and SAE J2602  Baud rate up to 20 kBd  Very low ElectroMagnetic Emissions (EME)  Very low current consumption in Sleep mode with remote LIN wake-up  Input levels compatible with 3.3 V and 5 V devices  Integrated termination resistor for LIN slave applications  Passive behavior in unpowered state  Operational during cranking pulse: full operation from 5 V upwards  Undervoltage detection  K-line compatible  Available in SO8 and HVSON8 packages  Leadless HVSON8 package (3.0 mm  3.0 mm) with improved Automated Optical Inspection (AOI) capability  Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)  Pin-compatible subset of the TJA1020, TJA1021 and TJA1022  Pin-compatible with the TJA1027