STM32F103VET6 ST
Available
STM32F103VET6 ST
Features
. Core: ArmR 32-bit CortexR-M3 CPU
-72 MHz maximum frequency,1.25 DMIPS/MHz
(Dhrystone 2.1) performance at 0 wait statememory access
Single-cycle multiplication and hardwaredivision
. Memories
- 256 to 512 Kbytes of Flash memory- up to 64 Kbytes of SRAM
-Flexible static memory controller with 4 Chip
Select. Supports Compact Flash, SRAM,
PSRAM,NOR and NAND memories
- LCD parallel interface, 8080/6800 modes.Clock, reset and supply management-2.0 to 3.6 v application supply and lOs
-POR,PDR, and programmable voltage detector(PVD)
-4-to-16 MHz crystal oscillator
- lnternal 8 MHz factory-trimmed RC- Internal 40 kHz RC with calibration
-32 kHz oscillator for RTC with calibration. Low power
- sieep, Stop and Standby modes
- VeAT supply for RTC and backup registers. 3×12-bit, 1 us A/D converters (up to 21channels)
-Conversion range: 0 to 3.6v-Triple-sample and hold capability-Temperature sensor
. 2 ×12-bit DIA converters
.DMA: 12-channel DMA controller
-Supported peripherals: timers, ADCs,DAC,
sDIO, PSs,SPIs, 2Cs and USARTs
. Debug mode
-Serial wire debug (SWD) &JTAG interfaces- Cortex-M3 Embedded Trace Macrocell TM. Up to 112 fast l/O ports
-51/80/112 lOs, all mappable on 16 external
interrupt vectors and almost all 5 V-tolerant
Features
. Core: ArmR 32-bit CortexR-M3 CPU
-72 MHz maximum frequency,1.25 DMIPS/MHz
(Dhrystone 2.1) performance at 0 wait statememory access
Single-cycle multiplication and hardwaredivision
. Memories
- 256 to 512 Kbytes of Flash memory- up to 64 Kbytes of SRAM
-Flexible static memory controller with 4 Chip
Select. Supports Compact Flash, SRAM,
PSRAM,NOR and NAND memories
- LCD parallel interface, 8080/6800 modes.Clock, reset and supply management-2.0 to 3.6 v application supply and lOs
-POR,PDR, and programmable voltage detector(PVD)
-4-to-16 MHz crystal oscillator
- lnternal 8 MHz factory-trimmed RC- Internal 40 kHz RC with calibration
-32 kHz oscillator for RTC with calibration. Low power
- sieep, Stop and Standby modes
- VeAT supply for RTC and backup registers. 3×12-bit, 1 us A/D converters (up to 21channels)
-Conversion range: 0 to 3.6v-Triple-sample and hold capability-Temperature sensor
. 2 ×12-bit DIA converters
.DMA: 12-channel DMA controller
-Supported peripherals: timers, ADCs,DAC,
sDIO, PSs,SPIs, 2Cs and USARTs
. Debug mode
-Serial wire debug (SWD) &JTAG interfaces- Cortex-M3 Embedded Trace Macrocell TM. Up to 112 fast l/O ports
-51/80/112 lOs, all mappable on 16 external
interrupt vectors and almost all 5 V-tolerant
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
