S9KEAZ128ACLH NXP
Available
S9KEAZ128ACLH NXP
• Operating characteristics – Voltage range: 2.7 to 5.5 V – Flash write voltage range: 2.7 to 5.5 V – Temperature range (ambient): -40 to 125°C • Performance – Up to 48 MHz Arm® Cortex-M0+ core – Single cycle 32-bit x 32-bit multiplier – Single cycle I/O access port • Memories and memory interfaces – Up to 8 KB flash – Up to 1 KB RAM • Clocks – Oscillator (OSC) - supports 32.768 kHz crystal or 4 MHz to 24 MHz crystal or ceramic resonator; choice of low power or high gain oscillators – Internal clock source (ICS) - internal FLL with internal or external reference, 37.5 kHz pre-trimmed internal reference for 48 MHz system clock – Internal 1 kHz low-power oscillator (LPO) • System peripherals – Power management module (PMC) with three power modes: Run, Wait, Stop – Low-voltage detection (LVD) with reset or interrupt, selectable trip points – Watchdog with independent clock source (WDOG) – Programmable cyclic redundancy check module (CRC) – Serial wire debug interface (SWD) – Aliased SRAM bitband region (BIT-BAND) – Bit manipulation engine (BME) • Security and integrity modules – 80-bit unique identification (ID) number per chip • Human-machine interface – Up to 57 general-purpose input/output (GPIO) – Up to 37 general-purpose input/output (GPIO) – Up to 22 general-purpose input/output (GPIO) – Up to 14 general-purpose input/output (GPIO) – Two up to 8-bit keyboard interrupt modules (KBI) – External interrupt (IRQ) • Analog modules – One 12-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC) – Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP) • Timers – One 6-channel FlexTimer/PWM (FTM) – One 2-channel FlexTimer/PWM (FTM) – One 2-channel periodic interrupt timer (PIT) – One pulse width timer (PWT) – One real-time clock (RTC) • Communication interfaces – One SPI module (SPI) – One UART module (UART) – One I2C module (I2C) • Package options – 24-pin QFN – 16-pin TSSOP
• Operating characteristics – Voltage range: 2.7 to 5.5 V – Flash write voltage range: 2.7 to 5.5 V – Temperature range (ambient): -40 to 125°C • Performance – Up to 48 MHz Arm® Cortex-M0+ core – Single cycle 32-bit x 32-bit multiplier – Single cycle I/O access port • Memories and memory interfaces – Up to 8 KB flash – Up to 1 KB RAM • Clocks – Oscillator (OSC) - supports 32.768 kHz crystal or 4 MHz to 24 MHz crystal or ceramic resonator; choice of low power or high gain oscillators – Internal clock source (ICS) - internal FLL with internal or external reference, 37.5 kHz pre-trimmed internal reference for 48 MHz system clock – Internal 1 kHz low-power oscillator (LPO) • System peripherals – Power management module (PMC) with three power modes: Run, Wait, Stop – Low-voltage detection (LVD) with reset or interrupt, selectable trip points – Watchdog with independent clock source (WDOG) – Programmable cyclic redundancy check module (CRC) – Serial wire debug interface (SWD) – Aliased SRAM bitband region (BIT-BAND) – Bit manipulation engine (BME) • Security and integrity modules – 80-bit unique identification (ID) number per chip • Human-machine interface – Up to 57 general-purpose input/output (GPIO) – Up to 37 general-purpose input/output (GPIO) – Up to 22 general-purpose input/output (GPIO) – Up to 14 general-purpose input/output (GPIO) – Two up to 8-bit keyboard interrupt modules (KBI) – External interrupt (IRQ) • Analog modules – One 12-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC) – Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP) • Timers – One 6-channel FlexTimer/PWM (FTM) – One 2-channel FlexTimer/PWM (FTM) – One 2-channel periodic interrupt timer (PIT) – One pulse width timer (PWT) – One real-time clock (RTC) • Communication interfaces – One SPI module (SPI) – One UART module (UART) – One I2C module (I2C) • Package options – 24-pin QFN – 16-pin TSSOP
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
