LP5912Q1.8DRVRQ1 TI
1 feature
1• Suitable for automotive electronics applications
• Have the following results consistent with AEC Q100:
- Device temperature Level 1: ambient operating temperature from -40 ° C to +125 ° C
Degree range
- Device Body Discharge Mode (HBM) classification Level 2
- Component Charging Mode (CDM) classification Level C6
• Input voltage range: 1.6V to 6.5V
• Output voltage range: 0.8V to 5.5V
• Output current up to 500 mA
• Low output voltage noise: 12µVRMS typical
• Power supply rejection ratio (PSRR) at 1kHz: 75dB (typical)
• Output voltage tolerance (VOUT ≥ 3.3V) : ±2%
• Low IQ (when enabled, no load) : 30µA (typical value)
• Low voltage drop (VOUT ≥ 3.3V) : Typical value at 500mA load
95mV
• Used with 1µF ceramic input and output capacitors for stable performance
• Thermal overload protection and short circuit protection
• Reverse current protection
• No noise bypass capacitor
• Automatic output discharge for fast shutdown
• The normal state output of the power supply has a typical delay of 140µs
• Internal soft start limits surge current
• Operating junction temperature range -- 40°C to +125°C
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
